my cart

[shakes_nig_rig]

i started out with a go cart that i got from my cousen or free that had a 3 hp brigs and straton. ive had it ging 45 with the 3 hp on the strate flats achording to one of the kluges at the impliment. i am puting a duble cilinder 4 stroke street bike moter on the fram after i get done lengthining it (it will be about 7 feet long). i am having it be a strate axyl with hydrolic disk brake in the rear (the old one off the front of the street bike) and might make it have brakes in the front but i dont think ill mess with that. im going to get the frame done and get som pics on hear hopfuly by next week.i am using 3/4 inch well pipe ( thick walls) its going to have about 3 inches of clerince with the tires i have but later im geting biger ones.

[MX588]

dude we should just rip up and down that min maintenence road when you get it done...with a street bike motor it would be so nutts.

[shakes_nig_rig]

screw thae min mantinece rode were frigen goin all over with it. and im makin a spot for a cooler and its going to have hedlights down low and a gun rack behind the driver. for 1 or 2 guns. i might even have enough rome to have a rumble seet.(a seat way back behind the moter)

[MX588]

if your trying to make something for hunting...your gonna need some suspension for sure....otherwise it will just bend

[Erik420]

suspension ASAP

[shakes_nig_rig]

i will work on that later but i gata get i done by august 16 if i want to get to state fari with is so suspenson will come later plus i need more $$ and time to make a good suspenson(fuly independent frunt and rear) the fully independent rear makes the drive train easier to constructif you do it a certint way. plus the frame twists without the cage right now when you go off roding with it but you need to go slow(you cant go fast or you get a rock in the a##.

[MX588]

that wouldnt feel good...if its gonna be a pasture buggy definatly make a skidplate or something so you dont catch one in the asshole

[shakes_nig_rig]

it has full skid plates but you end up siting on the skid plate. ill be puting a seat on this one. whare as my old cart you sat on the pece of steel skid plate.did you know on some other sights they wont even alow you to say sh!tys. whats up with that?

[MX588]

because this one is cool and lets people say what they think without being restricted...because everyone on here needs to swear sometimes...ha

[greasemonkey]

like now..fvck ;D

[shakes_nig_rig]

whell the moter jist got upgradeed to a 440 kawi with a 6 speed. eather that or ill jist get the bike runing and ride that. it needs cab work but ill probably jist throw on the carbs off of the 350 for now.

[shakes_nig_rig]

ya i welded the frame up today (used wire feed) and still have to mock up and cut the cage peces. i should have that done this weekend and start welding the cage up.

[shakes_nig_rig]

ya i figured id beter get the steering and moter mounted b4 i start building the rest of the fram/cage. its about 7 feet long and from 3 feet to 2 1/2 feet wide. ill be working on it a sh!t lode tomarow up at my job. i should get it down to wiring it up and puting a sproket on the back axyl.

[shakes_nig_rig]

ive got the cage finished. i am trying to get teh sproket mounted but i have to be sure i get it strate and have everything right the first time. and i am also wiering the moter and other stuf up. i am making air scoops on the sides and ading shetmetal sides

[Luehmann]

Man, learn how to spell dude!!

[punkrawkrider]

sounds like its gonna rip

[MX588]

Here is the beast.

[MX588]

It has potential...it looks like a wreck right now because he needs to get all the loose wires hooked up and stuff yet and all that stuff.

[punkrawkrider]

dude the frame looks like a sh!tbomb right now but the pipes look SWEEEEET

[MX588]

its a streetbike engine...so yes it looks good